E. D. Eliot
Well Known Member
Seeking to gain some some knowledge here. I have a new badly out of balance tire - never flown. Took the assembly out to Allen at Anti-Splat and he confirmed that I had the dot on the tire matched to the valve stem, etc. Allen said that he had never seen such an out of balance tire and that he couldn't balance it due to the very small side flanges on the Matco wheel assembly.
Brought the assembly home - took it apart and verified that I didn't have a bunched up/pinched tube, etc. Called Van's tech support and they wanted me to report the solution to them.
Suggestions please, as to what to do next? As they say, it's fun and education - not having too much fun with this one and need education. Thank you all.
Brought the assembly home - took it apart and verified that I didn't have a bunched up/pinched tube, etc. Called Van's tech support and they wanted me to report the solution to them.
Suggestions please, as to what to do next? As they say, it's fun and education - not having too much fun with this one and need education. Thank you all.