View Single Post
Old 01-16-2018, 06:46 PM
Robertc's Avatar
Robertc Robertc is offline
Join Date: Jul 2015
Location: Omaha, NE
Posts: 39

This confuses me a little. Before the upgrade I would get an occasional kickback when timed with the jumper at TDC or even a half tooth retarded. Once I realized I needed 4 deg. retard at start I figured Iíd just remove the jumper & set the retard by 2 teeth for 4deg on the older board & 8deg on the newer. I figured this would get me a running curve thatís retarded a little from the A curve on both. The start is really nice and spins up off the starter in 3 or 4 hits kind of like a rough running turbine. It seemed to make sense which is why I posted. ? Bob
Reply With Quote