View Single Post
Old 05-18-2018, 08:00 AM
PilotjohnS PilotjohnS is offline
Join Date: Jan 2016
Location: Los Angeles
Posts: 589
Default Priming fuse

I primed everything so far. The real hard part is priming the fuselage. There are so many brackets and stuff on the cabin bulkheads that need to be primed before assembly. And if you wish to paint before assembly, this adds another complexity. Iíll get thru it, but it isnt like the wings or tail where you can rough assemble, prime, final assemble and go. The fuse is where a semi permanent paint booth would be worthwhile.
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2019, worth every penny

RV9A- Status: tail feathers done less tips
Wings done less tips and avionics
Fuselage 30%
Reply With Quote