View Single Post
  #17  
Old 09-28-2017, 10:50 AM
bkervaski's Avatar
bkervaski bkervaski is online now
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 758
Default

Just a follow up on this for anyone else that hasn't got to this point .. not as bad as it sounds .. while it seemed like it took us a 10 hours to file the stops to spec, from start to finish was about an hour and a half and it's perfect. We just used a large file and a digital pitch gauge. File, refit, measure, repeat, etc. You do have to remove the linkage to easily get to the bottom stop.
__________________
#140376 RV-14A QB IO-390 Thunderbolt
Registered: N196
Progress: Away for PAINT
Reply With Quote