View Single Post
Old 07-02-2017, 01:23 PM
BillL BillL is offline
Join Date: Sep 2007
Location: Central IL
Posts: 4,951

Originally Posted by Reflex View Post
Many thanks for the quick replies. Just completed setting those 10 rivets. Ran the regulator up to 65 psi and used double offset. Rivets became a non issue. In fact, may be the best rivets I've set!

Thanks again.

Not only rivet size, but the stiffness of the structure will demand higher pressure. Keep that in mind for areas where there it is not a broad flat surface under. Like corners. Also, use more tape on the set.

1st Flight 1-27-18
Phase II 8-3-18
Repairman 11-15-18
Instrument Currency 12-17-18
Shrunken Exit = ??
No Photo? => PM me.
Reply With Quote