View Single Post
  #3  
Old 03-04-2019, 05:33 AM
rleffler's Avatar
rleffler rleffler is offline
 
Join Date: Jun 2006
Location: Delaware, OH (KDLZ)
Posts: 4,097
Default

Quote:
Originally Posted by lr172 View Post
As long as the pin goes fully through the aluminum frame on extension, you are good. Extra distance beyond fully in doesn't add anything. Larry
How do you measure fully?

I am aware of one instance where a builder (who I won't name and it wasn't me) had the pins extend just through the frame. The door flexed and opened. Fortunately, the pilot didn't get rattled and there was no incident.

I would recommend 1/2" to an 1" to prevent any flexing of the door to be problematic.
__________________
Bob Leffler
N410BL - RV10 Flying
http://mykitlog.com/rleffler
Reply With Quote