Thanks Steve. I think thatís what I had in my first RV8. It might be a little too long to go where I wanted to put it (them - 2) so I will check. The current filters and whatever I end up with are upstream of the fuel selector, electric fuel pump, and fuel flow transducer on the cold side of the firewall.
Bevan - Not sure how I would mount the fuel flow sender on the hot side, downstream of the engine driven pump in my carbureted engine. Iíll have to look and see if thatís possible, but I think GRT recommends keeping the FloScan on the cool side.
RV6/2001 built/sold 2005
RV8 Fastback/2008 built/sold 2015
RV4/bought 2019 Flying