View Single Post
  #1  
Old 06-25-2019, 12:48 PM
redhawk redhawk is offline
 
Join Date: May 2008
Location: Boulder, CO
Posts: 191
Default Landing gear weldment cracks from rough field ops

Hello out there. Just want to get some advice from anyone who has had to repair landing gear weldments from this common problem of Weldment cracks from landing on grass strips. I understand there is this reinforcement kit / heavier duty gear weldments from Vans. (WD-402-L&R, WD-403-L&R)
How big a job would this be?
Also thinking of converting to the long gear leg mount and legs while doing this...
Thanks

Last edited by redhawk : 06-25-2019 at 02:47 PM. Reason: terminology
Reply With Quote