View Single Post
Old 09-04-2018, 11:13 AM
rvbuilder2002 rvbuilder2002 is offline
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 8,114

Originally Posted by Jesse View Post
Page 47-7 specifies 0.090 pin material for this, not 1/8.
The result of an apparent miscommunication, because both of the RV-10 prototypes have been flying with 1/8" pins (actually .115") at this location since they were built.

It works quite well since if built per plans, the pins insert at the top mid point of the firewall.
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote