View Single Post
  #19  
Old 03-18-2017, 07:55 AM
boandrv7a boandrv7a is offline
 
Join Date: Mar 2017
Location: denver
Posts: 37
Default

Quote:
Originally Posted by plehrke View Post
To me, and I am an aerospace structural design engineer, this gear failure looks different then others as it looks like it failed due to more side loads then the others. The gear is bent to the side as apposed to others are straight aft.
Like any engineer should admit, my opinion is an opinion and only based on the very limited view I observed from the video. When I just watched the part 2 video there was no video of the nose gear off the aircraft. Was this edited out?
I had the nose-gear and engine mount over at the A/P, so I didn't get any video of it, but I will.

Jim
__________________
The AV8R's
Reply With Quote