View Single Post
  #12  
Old 11-19-2017, 07:06 AM
coffeeguy coffeeguy is offline
 
Join Date: Jul 2015
Location: Lake in the Hills, IL
Posts: 103
Default clamp it

When I first started a number of riveting troubles were caused by the parts not being clamped or secured very well. If the part is wobbling around and you are trying to support it, use the bucking bar and rivet gun... well, it doesn't work too well. If the parts are clamped and secured, you can see how everything lines up and you can get the bucking bar square to the rivet, then things go a lot easier.
__________________
Jeff Dingbaum
RV-14A empennage, wings
Cherokee 180
2018 dues paid
Reply With Quote