View Single Post
Old 07-18-2019, 04:20 PM
titanhank's Avatar
titanhank titanhank is offline
Join Date: Aug 2007
Location: Friendswood, Tx
Posts: 339

The ring gear is cyro fixed to the flywheel. The flywheel is normally dropped in a freezer overnight while the ring gear is heated in oil. When the ring gear is slipped over the flywheel and cools, it is fixed into place with an interference fit. Never heard of a ring gear support. The sabre spacer bolt directly to the crankshaft and drive lugs.

This is what it should look like.

10-1 pistons
Lycon port/polish
Dual pmags
EI Commander
Whirlwind 200rv prop
IFR Glass panel
Trutrak Vizion 385 Autopilot
Flightline Interior
Almost rv14 seat mod/cable locking
Electric seat back adjuster
Reply With Quote