Maybe this would be a good place to mention...
I believe more than one of us has probably searched high and low for angle pieces to make F-628B, F-629B and other pieces. I know I had a stack of long angle pieces that were packed with the wing spars, all of it carefully put away and was not sure which were used for the fuselage longerons and which were safe to cut up.
Fuse longerons are .125 angle. The .063 angle can be used where needed, so you (probably) don't have to order more from Van's.
RV-12 # 222 N980KM "Screamin' Canary" (bought flying)
Fisher Celebrity (under construction)
Previous RV-7 project (sold)