View Single Post
Old 03-26-2018, 09:00 AM
Varga to Vans Varga to Vans is offline
Join Date: Apr 2017
Location: Rolla, MO
Posts: 5
Default Fuel tank install

Building RV-8A. In section 7 of the build instructions the paragraph on "Installing Leading Edge" says to install the fuel tank with half the Z-bracket bolts and every other screw. I have not found in the instructions when the remaining bolts and screws are installed. Is it required or likely that the tanks will have to be removed from the spar during later portions of the build? Why not install all the Z-bracket bolts while the bottom skin is off?
Reply With Quote