My mod for cold weather flying in my -10 has not produced very good result. So far I have blocked the exhaust side of my oil cooler which worked fine on my -9 but no so good on the -10. Oil only reached 161 deg.F flying in 26 deg.F (-3C).
I have since but not tested, reduced air to the oil cooler from 4" to 2", a reduction of 75% by installing a restriction plate in front of the flexible 4" scat.
Please share comments/suggestions or past experiences in this matter.
Michel
I have since but not tested, reduced air to the oil cooler from 4" to 2", a reduction of 75% by installing a restriction plate in front of the flexible 4" scat.
Please share comments/suggestions or past experiences in this matter.
Michel