turbosaaber
Well Known Member
Well this is the second time my spinner bulkhead cracked. First I suspect was due to prop not being balanced...hartzell CS. Had prop balanced, compression test done, no pulses. One thing I did notice did not have enough clearance on the spinner cutout for the movement of the blades. Fixed that midway through the second bulkhead. Pulled the prop for belt change and saw cracks around two of the 4 mounting bolts for the prop. I'm at a loss here, did some quick internet research and seems like a carbon fiber spinner backplate will fix my problem. Any thoughts as I'm tired of pulling the prop? Spinner does track true.
Thanks,
Carl
Thanks,
Carl