What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

GNC300 XL

Rstansley

Member
I was flying yesterday had my 300 xl set up with the destination airport. I was looking at the WPT page to select a rnav approach when the unit seemed to do a soft reset. I did not turn power of but the unit acted like it was restarting. I did twice then no problems after. Any suggestions on what to look for?
 
I would reseat it in the tray first and make sure the allen screw is snug. I've had this happen over the years.
 
Back
Top