I am about to start ?pre-wiring? and planning the power distribution. I have no experience with electrical work and have been reading everything I can find to educate myself.
I plan to use fuses for most everything (CB?s for alt fld, elec trim, and autopilot).
A main bus and a separate Avionics bus (so two separate fuse blocks).
My question is, do i simply run the appropriate size wire from main bus to a switch (AV master) and then to the avionics bus? Or will i need some kind of relay, and why?
Btw, the avionics bus will only have GTR 200, GTN 625, GTX45R, and maybe G5).
Thanks.
I plan to use fuses for most everything (CB?s for alt fld, elec trim, and autopilot).
A main bus and a separate Avionics bus (so two separate fuse blocks).
My question is, do i simply run the appropriate size wire from main bus to a switch (AV master) and then to the avionics bus? Or will i need some kind of relay, and why?
Btw, the avionics bus will only have GTR 200, GTN 625, GTX45R, and maybe G5).
Thanks.