View Single Post
Old 10-11-2017, 01:49 PM
Tony_T's Avatar
Tony_T Tony_T is offline
Join Date: Dec 2008
Location: Lacey, WA
Posts: 1,256

Bracket riveting to forward wheel fairing. The plans call for using the #40 flat head cherry rivets to attach these brackets but I don't have a good working relationship with those little devils so used solids. Those are the cherries mentioned in the previous post. They are probably spec'd because the standard 3" yoke from the RV12 tool kits won't work over the wide flange. You can gun the solids or use a flange yoke if you have one. The kit also didn't include new nut plates; you could reuse the old ones but I had new ones on hand.


Last edited by Tony_T : 10-11-2017 at 09:03 PM.
Reply With Quote