Djgeib
Active Member
Getting close to drilling holes in the nylon flap blocks. Was wondering if standard drill bits are ok or if I should use plexiglass bits?
On the positive side completed my rotisserie today.
https://douglasgeib.smugmug.com/N104MG/i-Fq2p6zd
https://douglasgeib.smugmug.com/N104MG/i-TPs8Dqd
On the positive side completed my rotisserie today.
https://douglasgeib.smugmug.com/N104MG/i-Fq2p6zd
https://douglasgeib.smugmug.com/N104MG/i-TPs8Dqd