About to begin assembling the RV-12?s fuel tank. It is one of the newer tanks without the site gauge on the side and has the holes for Moeller fuel gauge and the new fuel tank venting method. Originally, I was considering ordering a handful of the MC-240-B1/2 1 oz kits of fuel tank sealant from the Van?s site figuring it could be used on the fuel tank and the remaining kits used on some of the other locations on the RV-12 which require sealant. However, just discovered the one ounce kits only have a 30 minute work time, which surely is not enough time to assemble the whole fuel tank.
I see there is the MC-236-B1/2 Tank sealant in a 3.5 ounce size with a 2 hour pot life and was wondering if anybody has used it to assemble their RV-12 tank? If so, is 3.5 ounces enough material to get the job done and can it be completed within the 2 hour limit?
I don?t have a gram scale so do not want to purchase a quart which requires weighing out the material and catalyst.
Comments appreciated ...happy building,
I see there is the MC-236-B1/2 Tank sealant in a 3.5 ounce size with a 2 hour pot life and was wondering if anybody has used it to assemble their RV-12 tank? If so, is 3.5 ounces enough material to get the job done and can it be completed within the 2 hour limit?
I don?t have a gram scale so do not want to purchase a quart which requires weighing out the material and catalyst.
Comments appreciated ...happy building,