View Single Post
  #3  
Old 02-20-2017, 02:20 PM
Marteck Marteck is offline
 
Join Date: Sep 2009
Location: Hutchinson Kanas
Posts: 33
Default

Thanks Dave,
I really scratched my head on that one, my parts shelf is nearly bare and no latch block. Of course I was looking for something that was not even on the drawing I was working on.
Are the #8 screw holes tapped into the roll bar? Seems kind of
thin for threads, even with the splice straps.
I will just press on then.
Jerry
Reply With Quote