View Single Post
Old 03-03-2018, 06:54 PM
Brett H Brett H is offline
Join Date: Oct 2013
Location: Columbus, Indiana
Posts: 33
Default Canopy Struts Are Rubbing the Canopy Frame

I am currently in the process of trying to get my canopy frame to fit.

In doing so, I have noticed that the inside edge of the canopy struts rub the canopy frame when the canopy frame is closed. The paint on the inside edge of the struts has been worn off. Also, it is not possible to get a piece of paper to slide between the strut and the canopy frame when closed. Further, the alignment between the canopy frame and the fuselage differs if the struts are or are not installed.

Anyone seen this before? If so, what did you do about it?


Brett Herrick
Columbus, IN
Reply With Quote