View Single Post
  #1  
Old 06-05-2017, 09:29 PM
Sandrews Sandrews is offline
 
Join Date: May 2017
Location: Denver CO
Posts: 115
Default NACA Vent to Overhead Console Transition

Working on finishing touches of the overhead console. Have two NACA vents cut into the rear sides. Will be using the Aerosports controller. OC has billet closable air vents from Stein Air so it will be pressurized when the controller is open. Question is how do you transition into the OC? Build a bulkhead with the air tubing sealed around it? Obviously if not sealed well, air will be blowing out the backside next to the rear baggage bulkhead.

Thanks
Reply With Quote