View Single Post
  #17  
Old 04-20-2017, 12:49 PM
goldbar goldbar is offline
 
Join Date: Apr 2010
Location: slc, UT
Posts: 29
Default mixture and prop

On my 7, I mounted the parking brake valve straight up above where the brake lines pass thru the firewall, I like to location, but be aware that is also in the same neighborhood that the mixture and prop controls go thru the firewall, at least for an IO engine. So depending on the firewall pass-thru method you will employ, the parking brake valve may or may not interfere with the placement of all.

I must agree that "that the further I deviate from the plans the time required goes up exponentially"
Reply With Quote