View Single Post
Old 01-30-2019, 09:41 AM
Bavafa Bavafa is offline
Join Date: Oct 2007
Location: Sacramento, CA
Posts: 3,069

Originally Posted by Carl Froehlich View Post
I strongly recommend you do not try to duplicate the Vanís wiring harness - but specifically do not use those little miniature molex connectors he has for the trim servos. Just wire it the way you want - as in something that make sense to you.

Call Stein and ask what connectors he recommends.

Plus one for this recommendation and this is what I did. Very happy with my decision. You can source the little connectors that are used for the trim server digi-key as well as the pins but they are not that easy to work with. Push the pins with pin pusher for better success.
N825SM RV7A - IO360M1B - SOLD
N825MS RV14A - IO390 - Flying
Dues paid
Reply With Quote