View Single Post
Old 01-22-2019, 03:30 PM
bschweinberg bschweinberg is offline
Join Date: Oct 2013
Location: West Chester, OH
Posts: 24
Default Canopy Release Assembly

[quote=iamtheari;1318532]Specifically, page 35-16 figure 1 shows the WD-619 inner tube flush with the WD-618-1 outer tube. Mine is about 1/8" back inside the outer tube

I noticed the same thing and chose to drill the hole a little further in, about 1/8 inch
Bill Schweinberg
West Chester, OH

N2814X Reserved

RV-14A Started Nov 2013
Builder #140100
Empennage/Tail Cone DONE! (95%)
Wings In Progress (90%)
Fuselage In Progress (75%)
Finish Not Started (not up-to-date)

=VAF= 2019 Dues Paid
Reply With Quote