View Single Post
  #17  
Old 01-19-2019, 02:56 PM
RonS RonS is offline
 
Join Date: Nov 2018
Location: Roswell, GA
Posts: 11
Default

Hit this same issue last week. I picked up a paint cutter arbor from Spruce which is threaded to accept my CS cutter and mounted it in the drill press. https://www.aircraftspruce.com/catal...utterarbor.php

__________________
Ron Slosberg
Roswell, GA
RV-14A -- Wings

Build Log: https://ronslosberg.com
Reply With Quote