View Single Post
  #7  
Old 05-06-2016, 08:14 AM
ShortSnorter ShortSnorter is offline
 
Join Date: Dec 2013
Location: NOLA
Posts: 199
Default

I'm with Ron on this one. Get it close and make small tweaks. I was more concerned with accuracy on the low end, so I made sure that the sender bottomed out per specs. On the high end of travel, I'm assuming my tanks will take slightly longer to show a drawdown since my upper limit of travel doesn't place the float as close to the top surface.

The float wires are cheap. Ask me how I know.
__________________
Ryan
RV-14 In-Progress
Build Site
Reply With Quote