View Single Post
Old 05-07-2018, 09:37 PM
Bavafa Bavafa is online now
Join Date: Oct 2007
Location: Sacramento, CA
Posts: 2,687

I had jacked up the plane for nose gear leg/pants fitting and installation and it was a bit of work but then I lowered it thinking that it only needs for the nose wheel. The main wheel pants are done and used the dimples as a guide and turned out great. I will probably lift the gear again to install the intersection fairing. Visually I don't detect any deflection since I have very little weight on it but it may come out closer to what needs to be.

Thanks all.
N825SM RV7A - IO360M1B - SOLD
N825MS RV14A - IO390 - Flying
Dues paid
Reply With Quote