View Single Post
  #2  
Old 03-12-2017, 09:48 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 741
Default

I used the edge roller to break the top skin before dimpling - then I test fit the skin and had a VERY slight gap at the edges when clecoed in place. I broke the edges a bit more with a seamer to make them nice and flat.
__________________
Turner Billingsley
RV-14A In Progress
N14VB Reserved
https://turnerb14a.blogspot.com/

Last edited by mturnerb : 03-12-2017 at 09:53 PM.
Reply With Quote