subpar_bucker
Well Known Member
I just finished laying up the canopy fiberglass and unfortunately the view from inside is as green as all get out I have the canopy glare shield that I'm going to install later, but there will be sections of the greenery visible after that is installed.
I have gray dye from West Systems now. I'm wondering if it's possible/advisable to sand down close to the canopy these areas that are visible and recoat them with dyed epoxy? Alternatively I can talk to the painter I'm using and see if he can simply shoot these areas on the inside and cover them later.
Any advice appreciated.
I have gray dye from West Systems now. I'm wondering if it's possible/advisable to sand down close to the canopy these areas that are visible and recoat them with dyed epoxy? Alternatively I can talk to the painter I'm using and see if he can simply shoot these areas on the inside and cover them later.
Any advice appreciated.