View Single Post
  #3  
Old 02-24-2017, 08:04 AM
sbal0906's Avatar
sbal0906 sbal0906 is offline
 
Join Date: Aug 2009
Location: Winnipeg, Canada
Posts: 193
Default

As Mel suggests, I used a Dremel with cut-off wheel but not right up to the line. Then, I finished it with the bench grinder.

Cheers,
__________________
Shamit Bal
http://www.flyaroundthesun.com
RV-9A
Working on empennage but the wing kit has been received.
Winnipeg, Manitoba, Canada
Reply With Quote