Ok if I were to use a Penski truck, does the engine and prop need to come off. All that is left to finish the plane is the QB wings. So I am dealing with an almost completed fuselage. Will this still work in a Penski trcuk, or should I try to find a flat tilt bed truck for hire. How did you ramp it up inside. Did you fabricated some ramps, go to Harbor Freight and by some or. Looks like Irma is going to set me back significantly, so if the hanger is still around next week, I need to move the plane to Georgia to finish. If its not, then I need not worry about finishing the plane. Thanks for your input.