Brantel
Well Known Member
Got my 430W installed and up and running this weekend. N159SB is now a "/G"!
Shot my first LPV approach ever yesterday at KMOR (RNAV-23). This approach is brand new and was only activated during the last cycle.
Way back when, I went ahead and installed a HS34 with my Dynon system to enable future connection to a 430W. This worked out beautifully! The integration of the HS34 to the 430W is super easy to do and works as advertised.
The Dynon AP instantly knows what to do with all that GPS steering info that it gets from the 430W. No changes were required here other than to configure the ARINC channel on the HS34 for the 430W. Just follow the Dynon WIKI for the settings and it works. The AP tracked the GPS steering flawlessly. It is cool watching it cut the corners.
I dropped about 5 gallons of sweat into my airplane during this install as there was much pain and agony under the panel required! Most of the hard work was involved with reworking the audio connections and installing a TX select switch since I do not have an audio panel yet. That will be another massive amount of rework when I get around to installing that.
Started out with the idea of installing cat whiskers on the tail for the NAV side of things but my W&B made me rethink this. I decided to send that back and last week I installed a Bob Archer wingtip antenna in the left wingtip. That thing seems to work very well at around 50miles. I did not check another VOR further than that but I will later. It worked perfectly on the localizer at KMOR. I have not tried the GS yet.
I am waiting on the TT Gemini PFD for a backup EFIS type solution and once I have that, I will call this bird Lite-IFR ready.
Shot my first LPV approach ever yesterday at KMOR (RNAV-23). This approach is brand new and was only activated during the last cycle.
Way back when, I went ahead and installed a HS34 with my Dynon system to enable future connection to a 430W. This worked out beautifully! The integration of the HS34 to the 430W is super easy to do and works as advertised.
The Dynon AP instantly knows what to do with all that GPS steering info that it gets from the 430W. No changes were required here other than to configure the ARINC channel on the HS34 for the 430W. Just follow the Dynon WIKI for the settings and it works. The AP tracked the GPS steering flawlessly. It is cool watching it cut the corners.
I dropped about 5 gallons of sweat into my airplane during this install as there was much pain and agony under the panel required! Most of the hard work was involved with reworking the audio connections and installing a TX select switch since I do not have an audio panel yet. That will be another massive amount of rework when I get around to installing that.
Started out with the idea of installing cat whiskers on the tail for the NAV side of things but my W&B made me rethink this. I decided to send that back and last week I installed a Bob Archer wingtip antenna in the left wingtip. That thing seems to work very well at around 50miles. I did not check another VOR further than that but I will later. It worked perfectly on the localizer at KMOR. I have not tried the GS yet.
I am waiting on the TT Gemini PFD for a backup EFIS type solution and once I have that, I will call this bird Lite-IFR ready.
Last edited: