Thread: Edge Distance
View Single Post
  #5  
Old 03-29-2017, 06:11 PM
Walt's Avatar
Walt Walt is offline
 
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 4,457
Default

Standard is 2D, however, 1.5D or less may be approved by the engineering folks depending on the material, loads etc. Anything less than 2D you should seek approval.
__________________
Walt Aronow, Dallas, TX (52F) RV7A, IO360, C/S, 1500+hrs

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154
Reply With Quote