I installed the rudder today and the cables are very very slack. I have the control approach pedals so I assume there will be some level of modification required to the system.
The pedals are in the forward most location so I built the F-10104 rudder cable links at the 2.25" recommendation.
I assume the control approach is different but need to understand how much (if any) slack is allowable in the system to know when I have modified it enough.
My play is to shorten (or eliminate) the links as required so the cables are tight with no slack and can get the required rudder movement, unless I am missing something.
Thanks
E
The pedals are in the forward most location so I built the F-10104 rudder cable links at the 2.25" recommendation.
I assume the control approach is different but need to understand how much (if any) slack is allowable in the system to know when I have modified it enough.
My play is to shorten (or eliminate) the links as required so the cables are tight with no slack and can get the required rudder movement, unless I am missing something.
Thanks
E