View Single Post
  #1  
Old 08-23-2018, 12:01 AM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Location: Rescue, CA. KROB
Posts: 270
Default Outboard leading edge construction question

So, Im thinking about the assembly and riveting of the outboard leading edge got me thinking. Is there any reason I cant back rivet the j-stiffener to the top skins firsts, then slide each rib in to its position prior to riveting them next? What can I say, I like back riveting and will do it when possible 🤪
__________________
Rob Lasater
Rv-14 still workin
Paid nov 2018
Reply With Quote