View Single Post
Old 10-06-2017, 08:51 PM
DBRuth DBRuth is offline
Join Date: Nov 2013
Location: Cumming,GA
Posts: 83
Default Cap vent

I drilled the vent hole slightly smaller than the plans called for, tap drill size for a 4-40 tap. Then I tapped both holes. If you don't like the results of the new vented cap, you can put a 4-40 screw in one of the holes. YMMV
Kit 120797
First flight 8/21/15 what an awesome aircraft!
HOBBS @187.5
Reply With Quote