View Single Post
  #11  
Old 04-07-2019, 07:26 PM
scorkey scorkey is offline
 
Join Date: Jun 2018
Location: Bonaire, GA
Posts: 6
Default

Quote:
Originally Posted by Jyuma View Post
Hi Scorkey... you're asking a question in a 4 year old post.
I'm building the tail cone of an RV-12is right now and I have not had any alignment problems with stiffeners.

If you can be more specific... what part is not aligning with what part... I'll try to help you.
Jyuma, I realize the thread is old, but Iím working with a 5 year old RV-12 empennage kit, so his experience (and the guidance from Vans) would be pertinent.

I was asking Wolfgang specifically because I experienced an identical issue to what he had reported having a problem with - Page 10-06 Step 4 and getting the J-Stiffeners F-1283A & B to align with the J channels of the lower skins.
Reply With Quote