pazmanyflyer
Well Known Member
Does any one have plans or pictures of a homemade pre-oiler for their overhauled/new engine?
Here's my case...We purchased a rebuild O290 and dad wants to have some type of pressurized system to pass oil through the engine oil passages before we re-install the cylinders. (Cylinders removed to inspect cam, crankshaft and the rest of the case internally.) This way dad, and our AP/AI signing the books, have visual confirmation that the oil passages internally/externally are not blocked. I have ideas but if someone else knows how this can be done I'd appreciate any information, plans, pictures you have on it.
Thanks
Here's my case...We purchased a rebuild O290 and dad wants to have some type of pressurized system to pass oil through the engine oil passages before we re-install the cylinders. (Cylinders removed to inspect cam, crankshaft and the rest of the case internally.) This way dad, and our AP/AI signing the books, have visual confirmation that the oil passages internally/externally are not blocked. I have ideas but if someone else knows how this can be done I'd appreciate any information, plans, pictures you have on it.
Thanks
Last edited: