View Single Post
Old 02-04-2010, 08:41 AM
William Slaughter's Avatar
William Slaughter William Slaughter is offline
Join Date: Jan 2005
Location: Houston, Texas
Posts: 439
Default Mod the existing tray

I set the 680 in place, & traced around it with a Sharpie, then did some basic measuring to be sure I had it marked square and straight. Fabricated three pieces of angle with rivet holes, then clamped and match drilled them to the existing bracket. On to the next thing!

Found the picture.
William Slaughter
Houston, TX
RV-8QB FF complete, baggage door done. Fiberglass work mostly done. Now at the airport for final assembly.

Last edited by William Slaughter : 02-06-2010 at 09:48 AM. Reason: Added picture
Reply With Quote