View Single Post
  #7  
Old 05-10-2019, 11:09 AM
F1Boss's Avatar
F1Boss F1Boss is offline
 
Join Date: Aug 2006
Location: Taylor Texas
Posts: 783
Default One gotcha

If you remove the tail, put the 3 tailspring bracket/aft bulkhead bolts back in for transport. Otherwise, the aft bulkhead will be ruined in a very short time.

Of course, this applies only when the ship is tied down with the tail wheel on the trailer...if you support the fuse with the tail wheel not on the surface, this caveat does not apply.
__________________
Best,
Mark

"Not everyone needs a Rocket. Some folks, however, shouldn't live life without one.
You know who you are."
Budd Davisson, 1997
Reply With Quote