Ok I'm having a brain freeze on page 15-02 of the wing assembly manual. Figure 4 and 5 seem to suggest I only install one nut plate per rib.
However reading ahead (dangerous I know). On page 15-05 figure 1 showing how the nose rib are attached to the spar it shows two ribs with the call out 2 attached nut plates.
So am I miss reading page 15-02 and should I be adding two nut plates per rib.
Also on page 14-03 it refers to a left and right doubler W-1207B but the inventory for the wing kit on includes one doubler - is the other one in the fuselage kit ?
Robert
However reading ahead (dangerous I know). On page 15-05 figure 1 showing how the nose rib are attached to the spar it shows two ribs with the call out 2 attached nut plates.
So am I miss reading page 15-02 and should I be adding two nut plates per rib.
Also on page 14-03 it refers to a left and right doubler W-1207B but the inventory for the wing kit on includes one doubler - is the other one in the fuselage kit ?
Robert