I'd like to get started painting the interior as I assemble it. I've seen a few recommendations:
I got 3 quotes for JetFlex and they ranged from about $400-$475 shipped. No way Jose.
There was a post I found where Mr. Horton recomended 1-stage urathane. I've shot base/clear before and don't like the idea of that much work so the 1-stage is appealing. Called my local PPG and they gave me these options:
PPG TrueFinish - an industrial coating with very low gloss rating of 10-12
PPG Pitthane - Their next step up in gloss ratings at 60-70. Durable, and drys in 6 hours
Are there any other urathanes out there that people have used and like? I might even be open to base/clear if there's a huge durability improvement.
I'm probably going to color it medium to dark gray. Are there any concerns about gloss in an RV-10? I won't color the panel or glareshield with this stuff. The Jetflex is in between my two PPG options at a 20-30 gloss units rating (1-100 range). Would 60-70 be too much?
- JetFlex WR
I don't like that they describe this as not being as durable as regular JetFlex which is 2-component. Durability is probably my most important requirement. Haven't checked price. - JetFlex
Would go with this if it wasn't $400!! - Rattle Cans
Don't like that option. Already ruled it out. - Urathane (both 1 and 2-stage)
Cheaper (>=$100). As durable as JetFlex?
I got 3 quotes for JetFlex and they ranged from about $400-$475 shipped. No way Jose.
There was a post I found where Mr. Horton recomended 1-stage urathane. I've shot base/clear before and don't like the idea of that much work so the 1-stage is appealing. Called my local PPG and they gave me these options:
PPG TrueFinish - an industrial coating with very low gloss rating of 10-12
PPG Pitthane - Their next step up in gloss ratings at 60-70. Durable, and drys in 6 hours
Are there any other urathanes out there that people have used and like? I might even be open to base/clear if there's a huge durability improvement.
I'm probably going to color it medium to dark gray. Are there any concerns about gloss in an RV-10? I won't color the panel or glareshield with this stuff. The Jetflex is in between my two PPG options at a 20-30 gloss units rating (1-100 range). Would 60-70 be too much?