Walt
Well Known Member
Actually in the airbox, vertical induction FI with no drain holes for excess fuel to escape. I saw another similar situation that caused a lot more damage, this one escaped with some minor air cleaner and fiberglass damage.
Airbox's (both carb and FI) need drain holes, I put 3 in, one in front and one behind the air cleaner for rain and such and another in the center of the filter to drain excess fuel that may accumulate there (tail draggers get the hole towards the rear).
This one will get the standard metal plate in the bottom repair as the fiberglass is also worn thru in a couple spots.
Airbox's (both carb and FI) need drain holes, I put 3 in, one in front and one behind the air cleaner for rain and such and another in the center of the filter to drain excess fuel that may accumulate there (tail draggers get the hole towards the rear).
This one will get the standard metal plate in the bottom repair as the fiberglass is also worn thru in a couple spots.
Last edited: