I'm nearing the end of the fuselage kit of my RV-14, and I've also been working on the finishing kit. I don't have the wings yet. I'm saving those for last. Along the way, I've run into a couple mysteries and I'm wondering if anyone knows the answers.
Mystery 1: On page 10-12 while building the tailcone, there are two K1000-08D nutplates installed on the top flange of the F-01406B bulkhead. The F-01406F baggage bulkhead corrugation covers this area up in section 42. In between those points, I haven't found where anything gets screwed into these nutplates.
Mystery 2: The left side of the flap motor cover (part F-01445B-L) has two openings along the aft edge. What is their purpose?
Mystery 1: On page 10-12 while building the tailcone, there are two K1000-08D nutplates installed on the top flange of the F-01406B bulkhead. The F-01406F baggage bulkhead corrugation covers this area up in section 42. In between those points, I haven't found where anything gets screwed into these nutplates.
Mystery 2: The left side of the flap motor cover (part F-01445B-L) has two openings along the aft edge. What is their purpose?