The standard Van's mixture and throttle cables for 9A aren't long enough. Aircraft Spruce (ACS Cables) has a lead time for 4 to 6 weeks for custom cables. Does anyone know where else to get custom length cables made.
I installed an io-320. Standard -9 cables were too short. I measured and found vans had cables that worked. If I recall they make have been cable used on RV10 installs.
I have a Superior IO320 with Airflow Performance fuel controller on a horizontal cold sump. I had to fabricate a custom bracket and needed to add 9 inches. The extension are too short.
After speaking with ACS cable and Aircraft Spruce, Van's cables have a 2.25" or 2.5" stroke which are non standard.