az_gila
Well Known Member
I'm removing the Vans fuel selector and mounting an Andair valve in the -10 QB kit I bought. At the same time I'm relocating it 3 inches down to copy the newer factory location.
It would be easier assembly and fabrication for me it the valve could move 1 inch or so further forward.
Can anyone with a finished -10 tell me if this could cause problems? I plan on using the AeroSport center console it that makes a difference.
It would be easier assembly and fabrication for me it the valve could move 1 inch or so further forward.
Can anyone with a finished -10 tell me if this could cause problems? I plan on using the AeroSport center console it that makes a difference.