DonFromTX
Well Known Member
I have a Dynon touch installed in an RV12, using the original D180 wiring with the Vans conversion harness to Skyview.
The only sound I get in the headset is the stall warning, and it seems weak. Audio tests produce nothing from the Skyview nor SL30 nav/com except a very faint "air rushing" sound. In the test setup menu, I THINK I could faintly hear two words repeated, but too weak to positively ID. I have numerous headsets, they all act the same, plugged into pilot or co pilot jacks.
Has anyone had a similar experience? My next action will be to check the connections between the headset wires and the conversion harness again.
The only sound I get in the headset is the stall warning, and it seems weak. Audio tests produce nothing from the Skyview nor SL30 nav/com except a very faint "air rushing" sound. In the test setup menu, I THINK I could faintly hear two words repeated, but too weak to positively ID. I have numerous headsets, they all act the same, plugged into pilot or co pilot jacks.
Has anyone had a similar experience? My next action will be to check the connections between the headset wires and the conversion harness again.